Home > Products >  high tensile api 7k grade mud hose
Email:[email protected]

Leave a Reply

high tensile api 7k grade mud hose

Rotary Drilling Hose / Decoking Hose — Copper State Rubber

API 7K LICENSED, CERTIFIE N o 7K-0014 FSL1 & FSL2 4,000, 5,000 and 7,500 PSI This high-quality decoking hose provides many years of trouble-free service. Appliion: Mud, Mud Booster/Jumper, Decoking, Motion Compensator Hoses

Global 2" 7500 PSI DRILL HOSE | glogdrill75k32

MANULI® DESIGN¸ API 7K Grade E FSL 1 and ISO 14693-E performance Burst Pressure 18¸750 PSI (129.28 Mpa) Cover Black synthetic rubber with abrasion¸ weather¸ and heat resistance Insert MF2000® - XTRALOCK TYPE Max Work Pressure 7¸500 PSI (51

API 7K Rotary Drilling Hose | Hoses | Pacific Hoseflex

1/7/2015· API 7K Rotary Drilling Hose Use: The drilling rotary hose is suitable for flexible connection between the top of the drilling riser and the swivel which can move vertically. It resists corrosion of hydrogen sulfide and can deliver water, oil, mud high‐pressure media.

High Pressure ParLock Multispiral Hose CEM69TC - API 7K | Parker …

Parker ParLock Multispiral hose CEM69TC has been designed for conveyance of cement slurries at high pressure up to 69.0 Mpa. The hose range is comaptible with ParLock

Presentation1

API Spec. 7K, ''Specifiion for Drilling and Welt'' Servicing Equipmen/ '' 4th Edition, Addendum 2, effective Tube of NBR reinforced by 1 (dash sizes 4, 5, 6, and 8) braid or 2 braids (dash size 10, 12 and 16) of high-tensile steel wire. Cover of NBR/PVCM4K:

Rotary Drilling Hose / Decoking Hose — Copper State Rubber

API 7K LICENSED, CERTIFIE N o 7K-0014 FSL1 & FSL2 4,000, 5,000 and 7,500 PSI This high-quality decoking hose provides many years of trouble-free service. Appliion: Mud, Mud Booster/Jumper, Decoking, Motion Compensator Hoses

2" 10,000 psi hose | oilfield hose API 7k Certified| 10k hose

High pressure 2" 10,000 psi w.p oilfield hose details below. Typical Appliion for the 2" 10,000 psi hose: Cement slurries, Drilling Mud, Hydraulic fluid, Fuel Line, High pressure Hydraulics, Bleed Off lines. USCG Fluid Power and Fuel/Lube Systems Accepted

TECHNICAL SPECIFIION: GOLDENCEMENT

TECHNICAL SPECIFIION: GOLDENCEMENT CEMENTING HOSE, API 7K FSL 0 & ISO 14693 Key Features High abrasion resistant tube compound - High flexibility and robustness of the hose structures - Safety factor burst/working pressure 2,25:1 - Hose

Rotary Vibrator Hose / Mud Hose / Cementing Hose / Drilling Hose / Kelly Hose / API 7K / Grade D / Grade …

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

Continental Prospector™ Underbalanced Drillng Hose mud & cementing hose

Continental Prospector mud & cementing hose STANDARD API Spec. 7K FSL 1 and FSL 0 CONSTRUCTION Bore type not full flow, smooth bore Liner material Neoprene Operating temperature API 7K FSL1 -22 F to 180 F (-30 C to 82 C) API 7K FSL0 -22 F

OIL & GAS PRODUCT RANGE

HOSE 8 Dimension how a hange ithou rio otice HOSE DRILLING// According to API 7K Grade D Tube: oil and drilling mud resistant synthetic rubber. Reinforcement: multiple layers of spiralled high tensile steel cords. Cover

2" 10,000 psi hose | oilfield hose API 7k Certified| 10k hose

High pressure 2" 10,000 psi w.p oilfield hose details below. Typical Appliion for the 2" 10,000 psi hose: Cement slurries, Drilling Mud, Hydraulic fluid, Fuel Line, High pressure Hydraulics, Bleed Off lines. USCG Fluid Power and Fuel/Lube Systems Accepted

Rotary Vibrator Hose / Mud Hose / Cementing Hose / Drilling …

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

API - 7K

hose length calculation specified in API 7L, Section A.1.1, to determine the optimum length of a rotary hose for any given appliion to avoid over-bending, high axial load or compression during operation.

High Pressure ParLock Multispiral Hose CEM69TC - API 7K | …

Parker''s ParLock Multispiral hose CEM69TC according to API 7K with Interlock technology is designed for cementing hose appliions with a flexible connection between the cementing pump manifold and the cementing head for conveyance of cement slurries at

Techfluid API 7K Mud & Cement Hose, API 17K Production Hoses, API 16D BOP Fire Rated Hoses, Rig Supply Hoses - High-Pressure Mud Hose/Rotary Hose …

High-Pressure Mud Hose/Rotary Hose/Vibrator Hose Standard: API Spec 7K FSL 2 API Monogram No: 7K-0106 Hose structure Tube: Reinforcement: Cover: NBR Smooth Bore High Strength Steel Cable Neoprene based rubber for anti-flaming, wear environment.

Hebei Huayu Special Rubber Co., Ltd. - API 7K Driling Hose, Rubber Hose

High pressure tubing hydraulic hose hose hydraulic pipe high temperature steel tube. $8.70 - $279.00 / Piece. 1.0 Pieces (Min. Order) Rotary Vibrator Cementing Drilling Kelly Hose API 7K Grade D Grade E. $8.70 - $279.00 / Piece. 1.0 Pieces (Min. Order) China High Pressure Hose Pipe (stand pipe)

Purchase API 7K Mud Cement Hoses 4" 10K Grade F from PME …

Mud cement hoses, also named rotary hose, kelly hose, high pressure drilling hose are used to convey high pressure drilling liquids. PME mud cement hose 4 inch WP 10000 Psi, Test 15000 Psi, Grade F is manufactured with the highest quality material, ends with API male fittings, threaded, butt welded hammer unions, and API flanges.

SUPER ARTERY SERIES HOSE -Letone

Super Artery wire braided hose. Tube:CR/NBR synthetic rubber. Reinforcement:braided high tensile super fexible steel wire, one braid impulse reaches 300,000 cycles, two braids reaches 600,000 cycles. OuterLayer:Black glossy anti-aging and non-peeling synthetic rubber layer. Low bending radius:30% lower than SAE/DIN standards.

API-7K Certified Hose-letone single

API-7K Certified Hose. The rotary drilling hose is suitable for flexible connection between the top of the drilling riser and the swivel which can move vertically. It resists corrosion of hydrogen sulfide and can deliver water, oil, mud high‐pressure media.Working pressure from 3500 PSI to 15000 PSI,dimension from 2” to 6”,for the tube

Drill Flex USA | Rotary Hose, Mud Hose, Kelly Hose, Vibrator Hose, De-coking Hose, Motion Compensator Hose

Rotary and Vibrator Hose, Grade D - API 7K-FSL1 10,000 psi TEST \ 5,000 psi W.P Grade D rotary and vibrator hose is manufactured with the highest quality material to handle the tough drilling appliions of today’s industry. Typical Appliion • de-coking

API - 7K

hose length calculation specified in API 7L, Section A.1.1, to determine the optimum length of a rotary hose for any given appliion to avoid over-bending, high axial load or compression during operation.

High Pressure Drilling Hoses - Fluid Control

HP Hose Types Summary. API 7K: For Mud and Cement hoses – temp -25°C to +100°C – Grade D, Grade E. Jumper Hose: used to convey high-pressure drilling liquids, loed anywhere in the high-pressure. mud piping system. Rotary Hose: used to convey high-pressure drilling liquids between the top of the mud standpipe and. the rotary swivel.

API 7K - Oil Field Hose - Rotary Vibrator Hose by Shanghai

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

Oilfield Kelly Drilling Rotary Hoses - API 7K Approved - Vibrator …

Flexible Vibrator Hose I.D. Working Pressure Test Pressure API Grade Safety factor O.D. Hose Body R storage R operation Weight of hose body in psi bar psi bar mm m m kg/m 2 4000 5000 276 345 8000 10000 552 690 C D 2.5 2.5 97 102 0.6 0.6 0.7 0.7

API 7K——Rotary Drilling And Vibrator Hose

API 7K——Rotary Drilling And Vibrator Hose Appliion: flexible connection between the upper end of the standpipe and the top drive/swivel and between the pump and the lower end of the standpipe for pumping mud at high

Continental Prospector™ Underbalanced Drillng Hose mud & cementing hose

Continental Prospector mud & cementing hose STANDARD API Spec. 7K FSL 1 and FSL 0 CONSTRUCTION Bore type not full flow, smooth bore Liner material Neoprene Operating temperature API 7K FSL1 -22 F to 180 F (-30 C to 82 C) API 7K FSL0 -22 F

API 7K - Oil Field Hose - Rotary Vibrator Hose by Shanghai

API 7K Rotary Drilling hoses also called oilfield drilling hoses, vibrator hoses, mud hoses, cementing hoses, kelly hoses, de-coking hoses, for the steady high pressure oilfield service. PME Grade D and Grade E rotary hose are designed and produced for mud delivery and cement service on the drilling rigs, by pumping mud at extra high pressure in oilfield drilling operation and exploration.

High pressure hose - Rotary Drilling Hose with Multiple Layers of High Tensile Steel Wire Reinforcement

Rotary drilling hose is mainly used for delivering water or oil based mud in oil fields, geological exploration, and cement repairing. Rotary Drilling Hose with Multiple Layers of High Tensile Steel Wire Reinforcement Rotary drilling hose is mainly used for conveying water-based or oil-based mud and other fluids in the working temperature of -30 C to +82 C.

OIL & GAS PRODUCT RANGE

HOSE 8 Dimension how a hange ithou rio otice HOSE DRILLING// According to API 7K Grade D Tube: oil and drilling mud resistant synthetic rubber. Reinforcement: multiple layers of spiralled high tensile steel cords. Cover