Home > Products >  din en 853 2sn marine sanitation hose
Email:[email protected]

Leave a Reply

din en 853 2sn marine sanitation hose

Hydraulic hoses | Cohose - Specialist in hoses and couplings

DIN EN 853 2SN R2 AT Rubber hydraulic hose with two steel reinforcements Vorige 1 Volgende Hoses Protection hoses Chemical hoses Gas hoses Hot water and steam hoses Food hoses Air hoses Marine hoses Oil and fuel hoses Stainless steel hoses

Hydraulic Hoses - SAE 100 R1 AT Hydraulic Hose Manufacturer …

Marking on the Hose: Ho 2SN DN 25 DIN/EN 853 - EXCEEDS SAE AT 1" - 25.4 MM - WP 16.Mpa-165Bar/2393PSI - MSHA Applicable Standards: SAE 100 R2 AT ( DIN EN 853 2SN ) Appliions: Medium - High pressure lines, Return Lines

Braided Hydraulic Hose - Kurt Hydraulics

SAE R2S (DIN EN 853 2SN) SAE R16S. SAE R17. For high-pressure appliions, we also have our own specialty braided hydraulic hose, the Kurt Tuff hydraulic hose. Braided hydraulic hose is available in inside diameters of ¼” to 2,” depending on grade. Our hose is temperature rated from -40°F to +212°F, and meets flame resistant MSHA

DIN EN853-2SN::High pressure hose and Hydraulic hoses

Nominal diameter Inside Diameter Reinforcement Diameter Outside Diameter Working Pressure TEST Pressure Burst Pressure Min.Bend Radius Weight mm mm mm MPa PSI MPa MPa mm Kg/m mm inch min max min max max max min 5 3/16" 4.6 5.4 10.6 11.7

HYDRAULIC HOSE RANGE - Shop

EN 857 2 WIRE COMPACT HOSE EN 853 2SN ISO 1436-1 HIGH TEMPERATURE HYDRAULIC HOSE SAE 100R1 AT - DIN 20022 1SN Hydraulic Hose SAE100 R2AT EN 853 2SN DIN 20022 2SN HYDRAULIC HOSE SAE100R3 EN 854 R3 Hydraulic Hose

HYDRAULIC HOSE RANGE - Shop

EN 857 2 WIRE COMPACT HOSE EN 853 2SN ISO 1436-1 HIGH TEMPERATURE HYDRAULIC HOSE SAE 100R1 AT - DIN 20022 1SN Hydraulic Hose SAE100 R2AT EN 853 2SN DIN 20022 2SN HYDRAULIC HOSE SAE100R3 EN 854 R3 Hydraulic Hose

High Temperature – Vnsaco

DIN EN 853 2SN | SAE100 R2AT HIGH TEMPERATURE CONSTRUCTION Inner tube: Synthetic rubber Two high tensile steel wire Read more High Temperature, Hydraulic Hoses IRVBTH1 DIN EN 853 1SN | SAE100 R1AT HIGH TEMPERATURE Read more

Balflex ® SAE 100R7 / EN 855 R7

All Balflex® hydraulic hoses are produced to Balflex® specifiions and according to ISO 1436, SAE J517 and EN 853 to EN 857 standards. They cover a wide variety of low to very high pressure appliions, in rubber, thermoplastic or P.T.F.E, with textile and steel reinforcement, for petroleum and water base hydraulic fluids.

DIN EN 857 2SC ::High pressure hose and Hydraulic hoses

DN Hose I.D Hose O.D Working Pressure Burst Pressure Minimum Bend Radius Weight inch mm mm Mpa psi Mpa psi mm kg/m 6 1/4" 6.4 14.2 45 6525 180 26100 75 0.28 8 5/16" 7.9 16 40 5800 160 23200 85 0.36 10 3/8" 9.5 18.3 37.5 5438 150 21750 90 0.41 13

Sewer Jetting Drain Cleaning Hose

synthetic rubber sewer jetting drain cleaning hose for high pressure water cleaning and rinsing of sewage systems Order Ref: 2SN-1/2 X 100 ASSY Tube: Special synthetic rubber Reinforcement: Two high tensile steel wire braids Cover: Abrasion, oil and weather

SR2SN Hydraulic Hose - SAE 100R2AT/2SN | Continental

The hose itself has been designed with a nitrile tube, black polychloroprene cover, two braid reinforcement and is capable of withstanding temperatures up to +212 F. Meets or exceeds the performance requirements of: SAE 100R2AT, EN 853 2SN, Flame Resistance USMSHA Designation, Higher EN/DIN Pressures, ABS Type Approved 1/4" through 1", SAE J1942/U.S. Coast Guard

Hydraulic Hose SAE100 R13 - Qinglin Kelly Hose

Extremely high pressure, high Impulse hydraulic appliions. This hose is designed to meet all requirements of SAE 100R13 specifiions and performance requirements of EN …

HYDRAULIC HOSE 2SN (DIN EN 853) - Winster Hose

HYDRAULIC HOSE 2SN (DIN EN 853) SPECIFIION: DIN EN 853. APPLIION: Petroleum base hydraulic fluids. TUBE: Seamless oil resistant synthetic rubber. REINFORCEMENT: Two highly tensile steel wire braid. COVER: Black, oil, weather and abrasion resistant synthetic rubber. TEMPERATURE RANGE: -40°C to +100°C. SAFETY FACTOR: 4:1.

Low and high pressure hose solutions to enhance performance

B B-2 OP ST ATALO A-HOOV-MC001-E3August 2017 Hydraulic hose Meets SAE 100R1AT, SAE 100R17, EN853 1SN, 1ST, EN857 1SC Meets SAE 100R2AT, 100R16, 100R19, EN853 2SN, 2ST, EN857 2SC GH194 Premium high temperature

SR2SN Hydraulic Hose - SAE 100R2AT/2SN | Continental

The hose itself has been designed with a nitrile tube, black polychloroprene cover, two braid reinforcement and is capable of withstanding temperatures up to +212 F. Meets or exceeds the performance requirements of: SAE 100R2AT, EN 853 2SN, Flame Resistance USMSHA Designation, Higher EN/DIN Pressures, ABS Type Approved 1/4" through 1", SAE J1942/U.S. Coast Guard

SR2SN Hydraulic Hose - SAE 100R2AT/2SN | Continental

The hose itself has been designed with a nitrile tube, black polychloroprene cover, two braid reinforcement and is capable of withstanding temperatures up to +212 F. Meets or exceeds the performance requirements of: SAE 100R2AT, EN 853 2SN, Flame Resistance USMSHA Designation, Higher EN/DIN Pressures, ABS Type Approved 1/4" through 1", SAE J1942/U.S. Coast Guard

Hydraulic Hose SAE100 R1-EN 853 1SN-Hydraulic Hose Supplier

Hydraulic Hose SAE100 R1 EN 853 1SN. Meets or exceeds the requirements of SAE 100 R1 Type AT and performance requirements of EN 853 1SN. Home Product Hydraulic Hose SAE 100 R1+EN 583 1SN SAE 100 R2+EN 853 2SN SAE 100 R3 SAE 100 R4

Low and high pressure hose solutions to enhance performance

B B-2 OP ST ATALO A-HOOV-MC001-E3August 2017 Hydraulic hose Meets SAE 100R1AT, SAE 100R17, EN853 1SN, 1ST, EN857 1SC Meets SAE 100R2AT, 100R16, 100R19, EN853 2SN, 2ST, EN857 2SC GH194 Premium high temperature

Hydraulic Hose SAE 100R2AT/DIN EN 8532SN

Hydraulic Hose SAE 100R2AT/DIN EN 853 2SN T ube: Oil resistant synthetic rubber,suitable for hydraulic fluids. Reinforcement: Two braids of high tensile steel wire. Cover: Abrasion,oil and weather resistant synthetic rubber. Temperature Range:-40 to +100

Rockmaster 2SN | Air-Way Canada

EN 853 2SN Click to Veiw PDF MAIN APPLIIONS Medium-high pressure lines in heavy duty environmental conditions, specific installations with severe abrasion conditions, marine appliions, underground and open pit mining CONTINUOUS SERVICE

Hydraulic hose - Yinchuan Tiger Rubber and Plastic Co., Ltd. - …

China Hydraulic hose alog of SAE 100 R1at Standard High Pressure Hydraulic Rubber Hose, DIN En 853 1sn Standard High Pressure Hydraulic Rubber Hose provided by China manufacturer - Yinchuan Tiger Rubber and Plastic Co., Ltd., page1.

SR2SN Hydraulic Hose - SAE 100R2AT/2SN | Continental

The hose itself has been designed with a nitrile tube, black polychloroprene cover, two braid reinforcement and is capable of withstanding temperatures up to +212 F. Meets or exceeds the performance requirements of: SAE 100R2AT, EN 853 2SN, Flame Resistance USMSHA Designation, Higher EN/DIN Pressures, ABS Type Approved 1/4" through 1", SAE J1942/U.S. Coast Guard

Sewer Jetting Drain Cleaning Hose

synthetic rubber sewer jetting drain cleaning hose for high pressure water cleaning and rinsing of sewage systems Order Ref: 2SN-1/2 X 100 ASSY Tube: Special synthetic rubber Reinforcement: Two high tensile steel wire braids Cover: Abrasion, oil and weather

SAE 100 R2AT - Espiroflex

DIN EN 853 2SN - SAE 100R2AT - ISO 1436. Coef. Entre 4 y 20 oC. Longitudes variables. If you need technical assistance, fill out the form or call us on

HYDRAULIC HOSE RANGE - Shop

EN 857 2 WIRE COMPACT HOSE EN 853 2SN ISO 1436-1 HIGH TEMPERATURE HYDRAULIC HOSE SAE 100R1 AT - DIN 20022 1SN Hydraulic Hose SAE100 R2AT EN 853 2SN DIN 20022 2SN HYDRAULIC HOSE SAE100R3 EN 854 R3 Hydraulic Hose

Rubber Sandblast Hose 12BAR - Orientflex

Soft wall abrasion resistant Sandblast Hose designed for the delivery of steel shots, sand, etc.Temperature: -40 (-40 ) to +70 (+158 ) Home Product Hydraulic Hose SAE 100 R1+EN 583 1SN SAE 100 R2+EN 853 2SN SAE 100 R3 SAE 100 R4 SAE 100 R5 SAE

DIN EN853-2SN::High pressure hose and Hydraulic hoses

Nominal diameter Inside Diameter Reinforcement Diameter Outside Diameter Working Pressure TEST Pressure Burst Pressure Min.Bend Radius Weight mm mm mm MPa PSI MPa MPa mm Kg/m mm inch min max min max max max min 5 3/16" 4.6 5.4 10.6 11.7

HYDRAULIC HOSE RANGE - Shop

EN 857 2 WIRE COMPACT HOSE EN 853 2SN ISO 1436-1 HIGH TEMPERATURE HYDRAULIC HOSE SAE 100R1 AT - DIN 20022 1SN Hydraulic Hose SAE100 R2AT EN 853 2SN DIN 20022 2SN HYDRAULIC HOSE SAE100R3 EN 854 R3 Hydraulic Hose

Hydraulic Hoses - SAE 100 R1 AT Hydraulic Hose Manufacturer …

Marking on the Hose: Ho 2SN DN 25 DIN/EN 853 - EXCEEDS SAE AT 1" - 25.4 MM - WP 16.Mpa-165Bar/2393PSI - MSHA Applicable Standards: SAE 100 R2 AT ( DIN EN 853 2SN ) Appliions: Medium - High pressure lines, Return Lines

SAE100 R2 / EN 853 2SN - SAE 100 R2 AT / DIN EN853 2SN - rotary drilling hose

Jingbo Petroleum Machinery Co.,Ltd., founded in 1986,has 30 years’ experience in the oilfield hoses area and is the leading manufacturer of Kelly Hose, Rotary Vibrator Drilling Hose, Choke & Kill Hose,BOP Hose,Cementing Hose,Rotary Decoking Hose and